Text Box: All products on this page are compatible with all Aquadyne controllers.

                       

Learn how X10 works.

 

 

 

 

 

 

 

Text Box: By receiving command signals from the X-10 Powerline Interface, the Control Modules open/close relay contacts to turn external devices (heaters, chillers, lights, etc.) on or off. Control Modules are configured with a unique X-10 communication “address,” using the alphanumerical dials on the front of each module. Module plugs directly into existing grounded electrical outlets. One Control Module is required for each external device to be controlled. 1 year warranty. Specifications: ·        120 VAC @ 60 Hz ·        15 Amp Resistive Load ·        1/3 HP Motor Load ·        500 Watts Incandescent ·        For USA Use Only  

               

                     

 

 

 

 

 

 

 

Text Box: By receiving command signals from the X-10 Powerline Interface, the Control Modules open/close relay contacts to turn external devices (heaters, chillers, lights, etc.) on or off. Control Modules are configured with a unique X-10 communication “address,” using the alphanumerical dials on the front of each module. Wall Receptacle replaces existing wall outlet. One Control Module is required for each external device to be controlled. 1 year warranty. Specifications: ·        120 VAC @ 60 Hz ·        15 Amp Resistive Load ·        1/3 HP Motor Load ·        500 Watts Incandescent ·        For USA Use Only  

           

                   

 

                   

Text Box: By receiving command signals from the X-10 Powerline Interface, the Control Modules open/close relay contacts to turn external devices (heaters, chillers, lights, etc.) on or off. Control Modules are configured with a unique X-10 communication “address,” using the alphanumerical dials on the front of each module. Heavy Duty Control Module replaces existing wall outlet. One Control Module is required for each external device to be controlled. 1 year warranty. Specifications: ·        250 VAC @ 50 Hz ·        20 Amp Resistive Load ·        1 HP Motor Load ·        1500 Watts Incandescent ·        For USA Use Only  

 

 

 

 

 

 

 

 

                       

 

                           

 

Text Box: By receiving command signals from the X-10 Powerline Interface, the Control Modules open/close relay contacts to turn external devices (heaters, chillers, lights, etc.) on or off. Control Modules are configured with a unique X-10 communication “address,” using the alphanumerical dials on the front of each module. The In-line Control Module has two leads and is designed for wiring directly into the device to be controlled. One Control Module is required for each external device to be controlled. 1 year warranty. Specifications: ·        125 VAC @ 60 Hz ·        15 Amp Resistive Load ·        1/3 HP Motor Load ·        500 Watts Incandescent ·        For USA Use Only  

 

 

 

 

 

 

 

                   

                       

 

 

 

 

 

Text Box: The Universal Module allows users to interface to existing alarm panel which would be notified of controller alarm conditions. Assign the controller general alarm to the Universal Module address. Relay output, 5A at 24VDC (15A, 125V possible). Follow link for installation instructions.