Text Box: Datalog, graph analysis and control of Octopus controller from your desktop. See software/hardware requirements below for direct and remote connection: ~Direct connection AquaWebII software and direct connect cable; ~Modem connection AquaWebII software, modem and modem/ethergadget cable; ~TCP/IP (requires static IP address) AquaWebII software, ethergadget and modem/ethergadget cable                                

 

                       

 

 

                       

Text Box: AquaWebII is a 32-bit Windows application that provides local and remote access and network management services between a PC and the H2O/S operating system software. This program is XP compatible and will interface with Octopus 3000s, Octopus 4000s and Aquanode controllers. It’s sole function is to help non-technical users with the complex task of monitoring water quality. AquaWeb allows any data stored in either an Octopus 4000, 3000 or AquaNode to be downloaded to the PC, and displayed in an easy to understand graphical format. See Octopus specifications for PC requirements. Now shipping version 1.3 released August 2005. To connect either an Octopus or AquaNode directly to a PC requires an AquaWeb RS-232 PC Cable (63-010870-10'; 63-010871-25'; 63-010872-50'). Remote communications require both a Modem (63-200186) or Ethergadget (63-205095) and a Modem/Ethergadget Cable (63-010806).  

 

 

                   

                   

 

 

 

Text Box: The AquaWeb RS-232 PC Cable allows for a direct cable connection between either an Octopus or AquaNodeES and a Windows PC. This provides the communication link necessary for data acquisition via AquaWeb. 10-ft., 25-ft or 50-ft cable with Mini-DIN to Female DB9 connectors. 1 year warranty. Due to the unique wiring configuration of this cable, non-Aquadyne cables are not supported by Aquadyne’s  Technical Support Department.  

 

                        

                   

 

 

 

 

               

                       

                       

 

 

Text Box: The Aquadyne Ethernet Terminal Server (EtherGadget) connects serial communications products such as AquaNodes, AquaGuards, and Octopus Controllers to Ethernet networks using the IP protocol family. Communication is established through the use of TELNET sessions between AquaWeb II and the EtherGadget device. To establish communications over the network each EtherGadget needs to have a STATIC IP address defined for it, along with a port number defined to direct communications. Configuration of the IP address and port number is done by user via terminal emulation program such as Hyper-Terminal. Text Box: Windows Plug-n-Play external Modem. Required for any application configured for remote pager alarms or AquaWeb remote data acquisition. 1 year warranty. For use with Octopus and AquanodeES models. Modem/Ethergadget cable (63-010806) is required to connect the Modem to the Octopus or AquaNode. Non-Aquadyne modems are not supported by Aquadyne's Technical Support Department. Text Box: 10-ft. cable connects modem and ethergadget to either the Octopus or AquaNodeES. 1 year warranty. The Modem Cable is required for connecting a modem to either the Octopus or AquaNode. Due to the unique wiring configuration of this cable, non-Aquadyne cables are not supported by Aquadyne’s  Technical Support Department.